Galvanised steel support bracket. Designed to fit most applications including Walls, Fences, Gates and Steel palisade fencing. A universal support bracket that can be used left or right handed. Fixed vertically on walls etc. or horizontally under a soffit or on a flat ledge.
Colour Coated Galvanised steel cranked support bracket
Ex 40 x 8 Mild steel galvanised bar 'L-shaped' and holed to receive 2 x 8mm fixing bolts (bolts not supplied) and drilled with 29mm diameter hole to support Vandgard Anti-Climb axle.
Supports should be adjusted to support Vandgard centrally over walls and fences with a clearance not exceeding 50mm. Bolted, clamped or welded to fences gates walls and soffits. Vandgard must be supported at 2 metre intervals.
(Designed to support Vandgard part nos VD05 & VSC05)
For steel palisade fencing, supports must be fixed to the pales at 2metre intervals. Usually cranked to the rear and fixed between the horizontal rail and vertical pale with one extra long 8mm fixing rivet .Use the existing fixing holes .
Galvanised after manufacture to BS EN ISO 1461.
Polyester powder coating if required to BS 6496:1984 is available for this product
Next Day shipping is charged at cost
(i.e. Currently £1.00p each + £12 per consignment)